How to Jailbreak iOS 16.6.1 with Palera1n | Supports iPhone 14

Sarah Diyana

Looking for a detailed guide on iOS 16.6.1 Jailbreak? Well, you’re in luck. The Palera1n semi-tethered tool offers robust support for a variety of devices, allowing you to install Sileo. This article covers two primary jailbreak methods — one for A8 to A11 devices and another for A12 to A16 devices. So let’s dive in.
iOS 16.6.1 Jailbreak Palera1nPhoto byPalera1n Jailbreak

Device Compatibility

Palera1n does not support all the latest devices. But there are alternatives for the latest devices. You may read this article to find out the iOS 16.6.1 Jailbreak Methods for any device.

Supported Devices for A8 to A11

  • A11 — iPhone 8, 8 Plus, and iPhone X
  • A10 — iPhone 7 and 7 Plus
  • A9 — iPhone 6S, 6S Plus, and iPhone SE (1st gen)
  • A10X — iPad Pro 12.9-inch (2nd gen), iPad Pro 10.5-inch
  • A10 — iPad (7th gen), iPad (6th gen)
  • A9X — iPad Pro 12.9-inch (1st gen), iPad Pro 9.7-inch
  • A9 — iPad (5th gen)

Supported Devices for A12 to A16

A16 to A9 devices are supported by the Palera1n Semi-Jailbreak tool created by a set of individual developers. More information and how to get Palera1n Semi Jailbreak for free is discussed below.

Download Palera1n iOS 16.6.1 Jailbreak Tool

You can download the Palera1n tool from its official source.

How to Use Palera1n: A Step-By-Step Guide

Palera1n is a semi-tethered jailbreak tool, meaning you will need to re-jailbreak after every reboot. So always keep your iPhone charged to avoid powering off.

Palera1n Jailbreak for macOS and Linux

  1. Download the Tool: Acquire the jailbreak software.
  2. Launch Terminal: Open a terminal window on your computer.
  3. Run Installation Script: Execute sudo /bin/sh -c "$(curl -fsSL"
  4. Authenticate: Input your administrator password.
  5. Remove Extended Attributes: Use sudo xattr -cr /usr/local/bin/palera1n
  6. Adjust Permissions: Type sudo chmod +x /usr/local/bin/palera1n
  7. Disable Passcodes on A11 Devices: This is required for the jailbreak to work.
  8. Erase All Content: Make sure you backup your device before performing this step.
  9. Connect Device to Computer: Follow instructions based on your cable type.
  10. Enter DFU Mode: Follow on-screen guidelines

Jailbreak with Palera1n: Use palera1n -cf and then palera1n -f to complete the jailbreak. Install Sileo: Open Palera1n app from the home screen and tap "Install" followed by "Repairing".

Palera1n Semi-Jailbreak Guide for A12 to A16 Devices

Download Tool: Install Palera1n from the Hackzee Store. Terminal and IPSW Apps: These will appear on your home screen. Open Terminal: Access the Palera1n Terminal app. Get IPSW Code: Open Palera1n IPSW and note your device model's IPSW code. Initiate Jailbreak: Paste the IPSW code to begin. Complete Jailbreak: Follow on-screen instructions. Install Sileo: Open Palera1n app and tap “Install” then “Sileo”.

How to Install Palera1n Semi-Jailbreak for 100% Free?

There is an app called zjailbreak where you can install Palera1n Semi-Jailbreak. But the app is a premium one and charges you $10 for installing a mobile config with a webclip. But I will show you how to install it for 100% free.

If you have already downloaded the free version of zjailbreak, you can use one of the below codes to get the premium version

  1. 223010
  2. 214560

Or else you can use the direct link for zjailbreak premium

There you have it — a thorough guide on how to perform an iOS 16.6.1 Jailbreak using the Palera1n semi-tethered and semi-jailbreak tools. Just remember, jailbreaking is not without its risks, so proceed with caution.

This is original content from NewsBreak’s Creator Program. Join today to publish and share your own content.

Comments / 0

Published by

An Individual Tech Blogger

Nevada City, CA

More from Sarah Diyana

Comments / 0