Rider in the Forest, Watercolor Tutorial

Niina Pekantytär

https://img.particlenews.com/image.php?url=3FJSpQ_0ccA8SdU00
fairychamber

What You Will Need

​In this watercolour tutorial, I will explain and show how I painted a rider in the night.

  • A4/ 8"x11" watercolor paper, Seawhite & Brighton (300 gsm)
  • Windsor & Newton watercolours
  • A few jars of water
  • Watercolour paintbrushes size 3, 6, and 8

https://img.particlenews.com/image.php?url=3e792y_0ccA8SdU00
fairychamber

1. Sketch the Drawing

​First, I made a loose pencil sketch on the watercolour paper and mounted it on my painting board. Tape the edges to keep the paper taut. You’ll remove it after the painting is finished and dry.

https://img.particlenews.com/image.php?url=2kSdRQ_0ccA8SdU00
fairychamber

2. Wet-on-wet Technique

​I started with a wet-on-wet technique. Brush the entire canvas with water. Then, divide the painting into two parts and paint the top area light blue and the lower part a darker blue. My rider is riding away from the forest, and so to create this effect of depth, I cleaned my brush in the water and created a little path for the rider.

https://img.particlenews.com/image.php?url=4MoDdC_0ccA8SdU00
fairychamber

3. Paint Trees

​Trees that are further away from the viewer are smaller and painted a light blue colour. Trees that are closer are bigger and painted with a darker blue to create depth.

What Colors Am I Using?

​Viridian green, black, ultramarine blue, cobalt blue, and crimson red are my colours of choice for this project.

https://img.particlenews.com/image.php?url=4bNqBu_0ccA8SdU00
fairychamber

4. Create The Leaves

​For the leaves, I’m using viridian green and ultramarine blue. I paint them just by pressing my paintbrush on the paper.

After the leaves are dry, I’ll paint bigger trees with black and blue paint.
When the larger trees are dry, paint bigger leaves on them to keep a consistent impression of depth. Add details and little branches to the trees.

Painting Tip!

​When you paint with watercolours, it is a good idea to have two or more jars of water, each reserved for different colours. This way, your colours stay clean, bright, and fresh.

https://img.particlenews.com/image.php?url=3OaK8b_0ccA8SdU00
fairychamber

5. Add Misty Effects

Paint the last layer of leaves with viridian red to create a more mysterious atmosphere.

Last but not least, take white charcoal and draw some lines around the rider. I´ll spread the charcoal with my fingers to create the effect of a misty forest.

6. You´re Finished!

Your painting is now done. I hope you enjoyed this tutorial and get inspired to paint landscapes with watercolours!

Comments / 0

Published by

Folklorist and historian. Alcott essayist. A host of the Little Women Podcast.

Finland, MN
622 followers

More from Niina Pekantytär

Comments / 0